Structural feasibility of parallel-laminated veneer crossarms

John Youngquist; Frank Brey; Joseph Jung

Treesearch

Structural feasibility of parallel-laminated veneer crossarms

Informally Refereed

Authors:

John Youngquist, Frank Brey, Joseph Jung

Year:

1977

Type:

Research Paper

Station:

Forest Products Laboratory

Source:

Res. Pap. FPL-RP-303. Madison, WI : U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 13 pages

Download (PDF 902 KB)

Download (PDF 902 KB): https://research.fs.usda.gov/download/treesearch/24724.pdf

Abstract

Experimentally and commercially produced laminated M-19 crossarms were tested by standard Rural Electrification Administration (REA) crossarm tests. The laminated crossarms, produced by laminating veneer and by laminating solid-sawn dimension stock, generally performed satisfactorily according to REA specified standards. Materials tested are described and results on standarized tests are summarized. The objective of this work was to provide indications of performance trends. Statistically valid performance comparisons between the materials tested were not possible because of the limited number of samples tested.

Keywords

Performance, veneers, yields, strength, penetration, preservatives, PLV, electrical distribution, Rural Electrification Administration, Douglas-fir, red pine, hemlock, white fir, micro-lam, laminated wood, utility poles

Citation

Youngquist, John; Brey, Frank; Jung, Joseph. 1977. Structural feasibility of parallel-laminated veneer crossarms. Res. Pap. FPL-RP-303. Madison, WI : U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 13 pages