Decay detection in red oak trees using a combination of visual inspection, acoustic testing, and resistance microdrilling

Abstract

Arborists are often challenged to identify internal structural defects hidden from view within tree trunks. This article reports the results of a study using a trunk inspection protocol combining visual observation, single-path stress wave testing, acoustic tomography, and resistance microdrilling to detect internal defects. Two century-old red oak (Quercus rubra) trees located in Capitol Park, Madison, Wisconsin, U.S., were visually inspected and then evaluated using a single-path stress wave timer, an acoustic tomography, and a resistance measuring drill. The trees were subsequently felled, and a disk at each test location was obtained and examined. It was found that the visual inspection and single-path stress wave tests correctly identified a general problem but without specificity; the tomograph accurately revealed the general location and magnitude of the defect within the cross-sections tested but required resistance microdrilling to precisely locate defects and differentiate between decay and crack-induced acoustic shadows.

Citation

Wang, Xiping; Allison, R. Bruce. 2008. Decay detection in red oak trees using a combination of visual inspection, acoustic testing, and resistance microdrilling. Arboriculture & urban forestry. Vol. 34, no. 1 (Jan. 2008): Pages 1-4.