Analytical determination of the surface area of a threaded fastener

Douglas R. Rammer; Samuel L. Zelinka

Treesearch

Analytical determination of the surface area of a threaded fastener

Informally Refereed

Authors:

Douglas R. Rammer, Samuel L. Zelinka

Year:

2008

Type:

Miscellaneous Publication

Station:

Forest Products Laboratory

Source:

Journal of testing and evaluation. Vol. 36, no. 1 (Jan. 2008): Pages 1-9.

Download (PDF 152 KB)

Download (PDF 152 KB): https://research.fs.usda.gov/download/treesearch/34320.pdf

Abstract

Accurate determination of corrosion rates for threaded fasteners hinges on the ability to determine the surface area on which corrosion is occurring. Currently, no general analytical expression of surface area exists for the threaded fastener types. A recent voluntary withdrawal of chromated copper arsenate as the primary, long-standing preservative treatment for wood resulted in the need to determine the corrosion rates of threaded fasteners. This paper developed general analytical surface area equations for a wedge-shaped thread and the area between the threads for three cases: (1) an increasing thread root and crest diameter, (2) constant thread root and crest diameters, and (3) a constant thread root but a decreasing thread crest diameter. The expressions are applied, numerically verified, and compared to simplified models for a No. 10–2.54 cm (1-in.) long wood screw.

Keywords

Metals, testing, fasteners, corrosion, joints, failure, screws, mathematical models, equations, wood preservatives, connectors, surface area, preservatives, chromated copper arsenate, CCA, preservative treated wood, treated wood

Citation

Rammer, Douglas R.; Zelinka, Samuel L. 2008. Analytical determination of the surface area of a threaded fastener. Journal of testing and evaluation. Vol. 36, no. 1 (Jan. 2008): Pages 1-9.