The influence of precoating layers on the performance of water-based barrier coatings
| Authors: | Kritee Pokharel, Douglas Bousfield, Jinwu Wang |
| Year: | 2025 |
| Type: | Scientific Journal |
| Station: | Forest Products Laboratory |
| DOI: | https://doi.org/10.32964/TJ24.1.36 |
| Source: | TAPPI Journal |
Abstract
Cellulose nanofibrils (CNF) on paper have been demonstrated to be an effective barrier against oxy- gen and grease and have been shown to improve the barrier performance of dispersion-based barrier coatings. The potential to produce paper grades that have good oxygen, grease, and moisture barrier properties is clear, but a better understanding of the synergies between CNF, other coating layers, and water-based barrier coatings (WBBC) is needed to optimize these systems. Different coat weights of a commercial WBBC were applied to papers that have a range of different qualities and thicknesses of CNF precoating layers. The same WBBC was also applied to pigmented coated paper, with various types of pigments and latex levels. Samples were characterized in terms of grease resistance, water vapor transmission rate (WVTR), and oxygen transmission rate (OTR) before and after folding. The results were contrasted to cases where the WBBC was applied to the paper with no precoating layer. When the WBBC is applied on a CNF layer or the pigmented coating layer, the performance of the WBBC for the water vapor barrier improves a significant amount compared to when the WBBC is applied to the base paper with no precoating layer. This improvement likely comes from these precoating layers filling in the large paper pores, which leads to the WBBC forming a continuous layer at low coat weights. Folding decreases the moisture barrier performance to some degree, but the grease resistance is not influenced by folding when a CNF precoating layer is involved. Oxygen barrier properties are moderate for the CNF layer alone and are less than 5 cm3/m2/day when WBBC is coated on the CNF layer. This result likely comes from the barrier coating's ability to repair defects in the CNF layer to stop the easy passage of oxygen in defect regions of the sample.
Application: Understanding of a precoating layer on the barrier performance of dispersion barrier coatings should give rise to new markets for paper in packaging. Using a highly refined cellulose layer as the precoating layer results in good oil/grease resistance and oxygen barrier, even after folding.