Treesearch

Devastating. Catastrophic. Unprecedented. This is how white-nose syndrome of bats (WNS) is characterized. It is one of the deadliest wildlife diseases ever observed and could have significant impacts on outdoor recreation, agriculture and wildlife management.

The fiber saturation point (FSP) is an important concept in wood– moisture relations that differentiates between the states of water in wood and has been discussed in the literature for over 100 years. Despite its importance and extensive study, the exact theoretical definition of the FSP and the operational definition (the correct way to measure the FSP) are still debated because different methods give a wide range of values. In this paper, a theoretical definition of the FSP is presented based on solution thermodynamics that treats the FSP as a phase boundary. This thermodynamic interpret...

Bonding of wood using phenol–formaldehyde adhesive develops highly durable bonds. Phenol– formaldehyde is believed to form primary bonds with wood cell wall polymers (e.g., lignin). However, it is unclear how this adhesive interacts and bonds to lignin. Through wood solubilisation methodologies, earlywood and latewood bonded assemblies were characterized using two-dimensional 1H–13C solution-state nuclear magnetic resonance spectroscopy so that chemical modification of the wood cell wall polymers, after phenol–formaldehyde resol curing, could be elucidated. The results showed a marked...

Latewood from Pinus taeda was reacted with alkaline phenol–formaldehyde (PF) adhesive and characterised using two-dimensional 1H–13C solution-state nuclear magnetic resonance (NMR) spectroscopy so that chemical modification of the wood cell wall polymers, after PF resol curing, could be elucidated. The results showed depletion in native lignin linkages via alkaline hydrolysis along with confirmation of newly formed diarylmethanes (methylene bridges) between guaiacyl lignin units and phenolic methylols.

Copper based waterborne wood preservatives are frequently used to extend the service life of wood products used in outdoor environments. While these copper based treatments protect the wood from fungal decay and insect attack, they increase the corrosion of metals embedded or in contact with the treated wood. Over the past ten years, several studies have looked at the corrosion mechanisms for metals in contact with copper treated wood. These studies have concluded that the most plausible corrosion mechanism involves the migration of copper ions from the wood treatment through the wood to...

Forest-derived biomaterials can play an integral role in a sustainable and renewable future. Research across a range of disciplines is required to develop the knowledge necessary to overcome the challenges of incorporating more renewable forest resources in materials, chemicals, and fuels. We focus on wood specifically because in our view, better characterization of wood as a raw material and as a feedstock will lead to its increased utilization. We first give an overview of wood structure and chemical composition and then highlight current topics in forest products research, including (1)...

Wood has always played an integral role in meeting our materials needs. The earliest evidence of woodworking dates back 1.5 million years to the modern human ancestor Homo erectus.1 Many characteristics that made wood a favorable material for our ancestors—relative abundance, ease of forming and shaping, exceptional strength-toweight ratio, aesthetic appeal—are the same characteristics that continue to make wood and forest products the material of choice for numerous applications today. Traditional forest products (e.g., paper, cardboard, dimensional lumber, plywood, oriented strandboard,...

A better understanding of how wood nanostructure swells with moisture is needed to accelerate the development of forest products with enhanced moisture durability. Despite its suitability to study nanostructures, small angle neutron scattering (SANS) remains an underutilized tool in forest products research. Nanoscale moisture-induced structural changes in intact and partially cut wood cell walls were investigated using SANS and a custom-built relative humidity (RH) chamber. SANS from intact wood sections cut from each primary wood orientation showed that although wood scattered anisotropic...

Subterranean termites need to minimize potentially pathogenic and competitive fungi in their environment in order to maintain colony health. We examined the ability of Actinobacteria isolated from termite guts in suppressing microorganisms commonly encountered in a subterranean environment. Guts from two subterranean termite species, Reticulitermes flavipes (Kollar) and Reticulitermes tibialis Banks, were extracted and plated on selective chitin media. A total of 38 Actinobacteria isolates were selected for in vitro growth inhibition assays. Target microbes included three strains of...

We examined the effects of elevated CO2 and/or O3 on the wood-decaying basidiomycete fungal community and wood decomposition rates at the Aspen Free-Air CO2 and O3 Enrichment (Aspen FACE) project. Mass loss rates were determined after one year of log decomposition on the soil surface, and wood-decaying basidiomycetes were isolated from decaying wood and identified via DNA sequencing. Aspen (Populus tremuloides Michx.) and birch (Betula papyrifera Marshall) wood differed significantly in wood-decaying basidiomycete fungal communities and decomposition rate. Twelve years of site exposure to...