Treesearch

Wire-bound packaging crates are used by the US Army to transport materials. Because these crates may be exposed to harsh environments, they are dip-treated with a wood preservative (biocide treatment). For many years, zinc-naphthenate was the most commonly used preservative for these packaging crates and few corrosion problems with the wires were observed. Recently, copper based alternatives to zinc naphthenate have been used, and corrosion problems have been observed. Here, we present the results of laboratory corrosion testing of 10 different wood treatments to see which preservatives...

Sulfite pretreatment to overcome the recalcitrance of lignocelluloses (SPORL) was applied to poplar NE222 chips in a range of chemical loadings, temperatures, and times. The combined hydrolysis factor (CHF) as a pretreatment severity accurately predicted xylan dissolution by SPORL. Good correlations between CHF and pretreated solids enzymatic digestibility, sugar yield, and the formations of furfural and acetic acid were obtained. Therefore, CHF was used to balance sugar yield with the formation of fermentation inhibitors for high titer ethanol production without detoxification. The...

For a termiticide to reach the American market where it's available for purchase by pest management professionals (PMPs), it must be federally registered by the U.S. Environmental Protection Agency (EPA). Chemical manufacturers wishing to register their products as a termiticide submit a registration package to the EPA containing fairly standard, nontarget toxicity and environmental fate studies, as well as efficacy data. The EPA uses all these factors to determine termiticide registration.

In plywood production, human operators find it difficult to precisely monitor the spread rate of adhesive in real-time. In this study, macroscopic fluorescence was used to estimate spread rate (SR) of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer. This method could be an option when developing automated real-time SR measurement for plywood or processes. Estimation of SR was shown where adhesive was spread uniformly and also where adhesive was spread as lines. For uniform spreading, average intensity of the fluorescence image predicted the SR of adhesive well, with an R2...

Cellulose nanofibril (CNF) films currently provide great opportunity in many applications with advantages of excellent mechanical strength, high light transmittance, and good barrier properties. However, processes for preparing CNFs are typically tedious and vary, along with their properties. Here, five preparation methods using various combinations of filtration, freeze-drying, and casting are applied to produce CNF films, and their major properties are compared. Three different types of CNFs having a range of fiber diameter and aspect ratio were examined using each of these five preparati...

Fiber-reinforced polymer composites have gained popularity through their advantages over conventional metallic materials. Most polymer composites are traditionally made with reinforcing fibers such as carbon or glass. However, there has been recent interest in sourcing these reinforcing fibers from renewable, natural resources. Nanocellulose-based reinforcements constitute a new class of these naturally sourced reinforcements. Some unique behavior of nanocellulose creates both opportunities and challenges. This chapter reviews the progress and some of the remaining issues related to the...

Methods to increase the energy density of biofuel feedstock for shipment are important towards improving supply chain efficiency in upstream processes. Towards this end, densified pretreated lignocellulosic biomass was produced using hot-pressing. The effects of fiber hornification induced by hot-pressing on enzymatic digestibilities of lodgepolepine and poplar NE222 wood chips pretreated by sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL) were examined. Pretreated wood chips were pressed at 25, 70, 90, 110, and 177 °C. The cellulose accessibilities of the pressed...

Cellulose nanocrystals (CNCs), a class of renewable bionanomaterials with excellent mechanical properties, have gained major interest as filler for polymers. However, challenges associated with effective CNC dispersion have hindered the production of composites with desired property enhancements. Here, composites of polypropylene (PP) and low density polyethylene (LDPE) with 5e10 wt% unmodified CNC are produced for the first time via a solventless process. In particular, we employ solid-state shear pulverization (SSSP). Optical and electron microscopy reveals excellent CNC dispersion with...

Documenting the environmental performance of building products is becoming widespread because of many green marketing claims made without scientific merit (i.e., green-washing). Developing environmental product declarations (EPDs) for building products is one way to accomplish this objective for scientific documentation and to counter green-washing (ISO 2006a; Bergman and Taylor 2011). LCI data are the underlying data for subsequent development of LCIAs and EPDs. EPDs are similar to nutritional labels for food. At present, there are many EPDs for North American structural wood products...

There is a growing demand for material properties to be used as inputs in fi re behavior models designed to address building fire safety. This comparative study evaluates using the mass loss calorimeter as an alternative to the cone calorimeter for obtaining heat release rates of wood-based materials. For this study, a modified mass loss calorimeter utilized an improved heat release rates method that added four thermocouples install ed on a chimney wall above the coni cal heater in addition to the standard air them1opile at the chimney top. The cone calorimeter used the standard oxygen...