High-temperature drying of 7/4 yellow-poplar flitches for S-D-R studs

R. Sidney Boone; Robert R. Maeglin

doi:10.2737/FPL-RP-365

Treesearch

High-temperature drying of 7/4 yellow-poplar flitches for S-D-R studs

Informally Refereed

Authors:

R. Sidney Boone, Robert R. Maeglin

Year:

1980

Type:

Research Paper

Station:

Forest Products Laboratory

DOI:

https://doi.org/10.2737/FPL-RP-365

Source:

Res. Pap. FPL-RP-365. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 4 pages

Download (PDF 136 KB)

Download (PDF 136 KB): https://research.fs.usda.gov/download/treesearch/21035.pdf

Abstract

Yellow-poplar was dried as 7/4 flitches at high temperatures and subsequently ripped into studs to meet National Grading Rule Standards for STUD grade. The effects of growth stresses in these flitches from smaller logs appear to be minimized by this process. Dry bulb temperatures from 235° to 295° F were explored in five drying trials. Best results were by drying for 28 hours at 235° F, followed by an equalizing period of 48 hours at 200° F and an equilibrium moisture content of 10 percent.

Keywords

Yellow poplar, flitches, drying, high-temperature drying

Citation

Boone, R. Sidney; Maeglin, Robert R. 1980. High-temperature drying of 7/4 yellow-poplar flitches for S-D-R studs. Res. Pap. FPL-RP-365. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 4 pages