Treesearch

Two different sampling approaches for estimating urban tree canopy cover were applied to two medium-sized cities in the United States, in conjunction with two freely available remotely sensed imagery products. A random point-based sampling approach, which involved 1000 sample points, was compared against a plot/grid sampling (cluster sampling) approach that involved a 1.83 m square grid of points embedded within 0.04 ha circular plots. The imagery products included aerial photography from the U.S.Department of Agriculture National Agricultural Imagery Program (viewed within ArcGIS), and...

CORRIM, the Consortium for Research on Renewable Industrial Materials (www.corrim.org), has derived life-cycle inventory (LCI) data for nine major wood products and four wood production regions in the United States (US). The LCI data cover forest regeneration through to final product at the mill gate. CORRIM’s LCI studies have included both structural and nonstructural wood products. This report focuses on the average North American production of hardboard and engineered wood siding and trim (EWST). Hardboard and EWST are in the same composite wood product category and in this report will...

Climatic conditions exert important control over the growth, productivity, and distribution of forests, and characterizing these relationships is essential for understanding how forest ecosystems will respond to climate change. We used dendrochronological methods to develop climate–growth relationships for two dominant species, Populus tremuloides (quaking aspen) and Pinus resinosa (red pine), in the upper Great Lakes region to understand how climate and water availability influence annual forest productivity. Trees were sampled along a topographic gradient at the Marcell Experimental...

This document provides a summary of the technical meeting on greenspace and cumulative risk assessment (GS-CRA) convened May 4−5, 2015 in Cincinnati, OH, by the U.S. Environmental Protection Agency (EPA) Office of Research and Development (ORD) National Center for Environmental Assessment (NCEA). This report highlights the presentations, discussions, and practical suggestions offered by the meeting participants; however, the report does not present consensus opinions of the meeting participants. Meeting Objective: Identify and evaluate approaches and appropriate data sources for measuring...

Decades of research have documented continuous tension between anthropocentric needs and the environment’s capacity to accommodate those needs and support basic human welfare. The way in which society perceives, manages, and ultimately utilizes natural resources can be influenced by underlying environmental ethics, or the moral relationship that humans share with the natural world. This discourse often centers on the complex interplay between the tangible and intangible benefits associated with nonhuman nature (e.g., green space), both of which are relevant to public health. When ecosystem...

To maximize the representativeness of results from surveys, coverage, sampling, nonresponse, measurement, and analysis errors must be minimized. Although not a cure-all, one approach for mitigating nonresponse errors is to maximize cooperation rates. In this study, personalizing mailings, token financial incentives, and the use of real stamps were tested for their impacts on cooperation rates for family forest owners asked to participate in the U.S. Forest Service's National Woodland Owner Survey in the state of Connecticut. Token financial incentives, a two-dollar bill included in the...

Recent work has highlighted the importance of movement of chemicals and ions through the wood cell wall. This movement depends strongly on moisture content and is necessary for structural damage mechanisms such as fastener corrosion and wood decay. Here, we present the first measurements of electrical resistance of southern pine at the subcellular level as a function of wood moisture content by using a 1-um-diameter probe. In latewood, measurements were taken in both the secondary cell wall (S2) and the cell corner compound middle lamella (CCCML). In earlywood, measurements were only...

The purpose of this investigation was to systematically examine the variability associated with temporally-oriented invertebrate data collected by citizen scientists and consider the value of such data for use in stream management. Variability in invertebrate data was estimated for three sources of variation: sampling, within-reach spatial and long-term temporal. Long-term temporal data were also evaluated using ordinations and an Index of Biotic Integrity (IBI). Through two separate investigations over an 11-year study period, participants collected more than 400 within-reach samples...

Bamboo raw feedstocks with large particle size (20−80 mesh) were subjected to a microwave liquefaction system, and the liquefied products were separated into biopolyols and liquefied residues. Biopolyols were first analyzed by gas chromatography mass spectrometry (GC−MS), and the main components were sugar derivatives with 2−4 hydroxyl groups and phenolic compounds derived from lignin. The residues were collected and evaluatedfor potential use in the production of nanofibrillated cellulosic fibers. Results show that liquefied residue content as well as its physicochemical properties varied...

Bamboo stems were subjected to a mechanical treatment process for the extraction of bamboo fiber bundles. The fiber bundles were used as reinforcement for the fabrication of high-performance composites with phenolic resins as matrix. The influence of fabricated density and bamboo species on physical–mechanical properties of bamboo fiber bundle reinforced composites (BFCs) was evaluated. The results revealed that BFCs with density of 1200 kg/m3 exhibited lower water absorption, better dimensional stability, and higher mechanical properties with comparison to those with lower density. The...