Treesearch

Decades of research have documented continuous tension between anthropocentric needs and the environment’s capacity to accommodate those needs and support basic human welfare. The way in which society perceives, manages, and ultimately utilizes natural resources can be influenced by underlying environmental ethics, or the moral relationship that humans share with the natural world. This discourse often centers on the complex interplay between the tangible and intangible benefits associated with nonhuman nature (e.g., green space), both of which are relevant to public health. When ecosystem...

To maximize the representativeness of results from surveys, coverage, sampling, nonresponse, measurement, and analysis errors must be minimized. Although not a cure-all, one approach for mitigating nonresponse errors is to maximize cooperation rates. In this study, personalizing mailings, token financial incentives, and the use of real stamps were tested for their impacts on cooperation rates for family forest owners asked to participate in the U.S. Forest Service's National Woodland Owner Survey in the state of Connecticut. Token financial incentives, a two-dollar bill included in the...

Recent work has highlighted the importance of movement of chemicals and ions through the wood cell wall. This movement depends strongly on moisture content and is necessary for structural damage mechanisms such as fastener corrosion and wood decay. Here, we present the first measurements of electrical resistance of southern pine at the subcellular level as a function of wood moisture content by using a 1-um-diameter probe. In latewood, measurements were taken in both the secondary cell wall (S2) and the cell corner compound middle lamella (CCCML). In earlywood, measurements were only...

The purpose of this investigation was to systematically examine the variability associated with temporally-oriented invertebrate data collected by citizen scientists and consider the value of such data for use in stream management. Variability in invertebrate data was estimated for three sources of variation: sampling, within-reach spatial and long-term temporal. Long-term temporal data were also evaluated using ordinations and an Index of Biotic Integrity (IBI). Through two separate investigations over an 11-year study period, participants collected more than 400 within-reach samples...

Bamboo raw feedstocks with large particle size (20−80 mesh) were subjected to a microwave liquefaction system, and the liquefied products were separated into biopolyols and liquefied residues. Biopolyols were first analyzed by gas chromatography mass spectrometry (GC−MS), and the main components were sugar derivatives with 2−4 hydroxyl groups and phenolic compounds derived from lignin. The residues were collected and evaluatedfor potential use in the production of nanofibrillated cellulosic fibers. Results show that liquefied residue content as well as its physicochemical properties varied...

Bamboo stems were subjected to a mechanical treatment process for the extraction of bamboo fiber bundles. The fiber bundles were used as reinforcement for the fabrication of high-performance composites with phenolic resins as matrix. The influence of fabricated density and bamboo species on physical–mechanical properties of bamboo fiber bundle reinforced composites (BFCs) was evaluated. The results revealed that BFCs with density of 1200 kg/m3 exhibited lower water absorption, better dimensional stability, and higher mechanical properties with comparison to those with lower density. The...

Cellulose nanofibers were successfully isolated from bamboo using microwave liquefaction combinedwith chemical treatment and ultrasonic nanofibrillation processes. The microwave liquefaction couldeliminate almost all the lignin in bamboo, resulting in high cellulose content residues within 7 min, andthe cellulose enriched residues could be readily purified by subsequent chemical treatments with lowerchemical charging and quickly. The results of wet chemistry analyses, SEM images, and FTIR and X-rayspectra indicated the combination of microwave liquefaction and chemical treatment was...

Microwave-assisted selective liquefaction was proposed and used as a novel method for the isolation of holocellulose fibers. The results showed that the bamboo lignin component and extractives were almost completely removed by using a liquefaction process at 120 8C for 9 min, and the residual lignin and extractives in the solid residue were as low as 0.65% and 0.49%, respectively. Increasing the reaction temperature or time could decrease the solid yield, but they can also enhance the removal of lignin and extractives from bamboo particles and increase the holocellulose content in the...

Objectives of postfire seeding in the Great Basin include reestablishment of perennial cover, suppression of exotic annual weeds, and restoration of diverse plant communities. Nonconventional seeding techniques may be required when seeding mixes of grasses, forbs, and shrubs containing seeds of different sizes. We conducted an operational-scale experiment to test the effectiveness of two rangeland drills (conventional and minimum-till) for seeding native plant mixes following wildfire in Wyoming big sagebrush (Artemisia tridentata Nutt. ssp. wyomingensis Beetle & Young) communities. Both...

Understanding plant–plant facilitation is critical for predicting how plant community function will respond to changing disturbance and climate. In longleaf pine (Pinus palustris Mill.) ecosystems of the southeastern United States, understanding processes that affect pine reproduction is imperative for conservation efforts that aim to maintain ecosystem resilience across its wide geographic range and edaphic gradients. Variation in wildland fire and plant–plant interactions may be overlooked in “coarse filter” restoration management, where actions are often prescribed over a variety of...