Treesearch
Displaying 25,791 - 25,800 of 65,214 Publications- Because pressure-treated wood is perceived as economical and relatively easy to install, federal, state and local government agencies sometimes utilize treated wood for industrial-type applications. When these agencies have questions or concerns about treated wood they may make inquiries to the US Forest Products Laboratory. These inquiries provide an indication of topics where there may be a lack of understanding and a need for more information about industrial treated wood products. The most common inquiry involves types of treated wood available and the appropriateness of a treatment...AuthorsStan Lebow, James WackerKeywordsPressure treatment, wood deterioration, wood preservatives, preserved wood, service life, standards, forest products, environmental aspects, product life cycle, wood products, corrosion, anti-corrosives, copper, performance standards, wood durability, preservatives, preservative treated wood, treated wood, life cycle assessment, product testing, durability, performance testingSourceProceedings, one hundred seventh annual meeting of the American Wood Protection Association ... Fort Lauderdale, Florida, May 15-17, 2011: Volume 107. Birmingham, Ala. : American Wood Protection Association, c2011: p. 218-221.Year2011
- A preliminary study to evaluate naturally durable wood species in an above ground field trial using Gas Chromatography-Mass Spectrometry (GC-MS) detected differences in fatty acid extractives between species and within the same species over time. Fatty acids were extracted with chloroform: methanol mixture then methylated with sodium methoxide and fractionated using solid phase extraction columns. Fatty acids were identified, quantified with known standards, and compared between wood species. Future analysis of exposed specimens will determine longevity of extractives and correlate changes...AuthorsGrant T. Kirker, Amy B. Bishell, Stan Lebow, Carol A. ClausenKeywordsWood-decaying fungi, antibacterial agents, antifungal agents, fungicides, biodegradation, wood chemistry, methylation, methanol, chloroform, fatty acids, mass spectrometry, gas chromatography, deterioration, chemical composition, wood variation, resistance to decay, durability, wood extractives, sodium methoxide, fractionation, biocides, wood decay, durabilitySourceProceedings, one hundred seventh annual meeting of the American Wood Protection Association ... Fort Lauderdale, Florida, May 15-17, 2011: Volume 107. Birmingham, Ala. : American Wood Protection Association, c2011: p. 41-44.Year2011
- Physical, mechanical, and fire properties of the injection-molded wood flour/polypropylene composites (WPCs) incorporated with different levels of boron compounds, borax/boric acid (BX/BA) (0.5:0.5 wt %) and zinc borate (ZB) (4, 8, or 12 wt %) were investigated. The effect of the coupling agent loading (2, 4, or 6 wt %), maleic anhydride-grafted PP (MAPP), on the properties of the WPCs was also investigated. Incorporation of the fire retardants (FRs) into the WPCs decreased the physical and mechanical properties as compared to the WPCs without FR. The FR treatments had little impact on the...AuthorsTurgay Akbulut, Nadir Ayrilmis, Turker Dundar, Robert H. White, Fatih Mengeloglu, Zeki Candan, Umit Buyuksari, Erkan AvciKeywordsBoron compounds, fire retardants, injection molding, polypropylene, polyethylene, strength, water resistance, wood plastic composites, composite materials, fire testing, mechanical properties, wood-plastic composites, plastic-impregnated wood, polymerization, injection molding of plastics, thermoplastic composites, plastics, extrusion, extrusion process, thermal properties, fire risk assessment, maleic anhydride, flame spread, moisture, crystallization, boron, borax, boric acid, heat of combustion, strength, polymers, polymerization, fire hazard, fire resistance, thermal degradation, flammability, zinc borate, moisture content, crystallinity, coupling agents, cone colorimetry, ignitionSourceProceedings of the 11th international conference on wood and biofiber plastic composites & nanotechnology in wood composites symposium, 2011 May 16-17, Madison, WI. Madison, WI : Forest Products Society, 2011: 21 p. [1 flash drive]Year2011
Combining hygrothermal and corrosion models to predict corrosion of metal fasteners embedded in wood
A combined heat, moisture, and corrosion model is presented and used to simulate the corrosion of metal fasteners embedded in solid wood exposed to the exterior environment. First, the moisture content and temperature at the wood/fastener interface is determined at each time step. Then, the amount of corrosion is determined spatially using an empirical corrosion rate model and the inputs of the first step. The result is a corrosion profile along the length of the fastener generated by summing the corrosion depths determined at each time step. We apply the combined model to predict the...AuthorsSamuel L. Zelinka, Dominique Derome, Samuel V. GlassKeywordsMetals, testing, corrosion, anti-corrosives, fasteners, joints, wood preservatives, chemical reactions, moisture, wood moisture, service life, accelerated life testing, temperature, decks, rain, precipitation, climatic zones, computer simulation, connectors, tests, treated wood, preservative treated wood, exposure tests, moisture content, accelerated testing, durability, hygrothermal modelingSourceBuilding and environment. Vol. 46, no. 10 (Oct. 2011): p. 2060-2068.Year2011- The influences of temperature, heating rate, purge gas type, and flow rate on the yield of chars produced from pyrolyzing southern pine chips were investigated. Pyrolysis temperatures were between 450°C and 1,000°C, with heating rates of 0.5°C/min, 1.0°C/min, 10°C/min, 30°C/min, 50°C/min, and 100°C/min. Purge gases, nitrogen (N2), hydrogen (H2) and N2-H2, mixture (10% H2), were used at flow rates from 100 to 1,000 mL/min. Pine char yield decreased as temperature, heating rate, or purge gas flow rate increased. Two regions with significantly different decrease rates of pine char yield can...AuthorsHossein Toghiani, Fei Yu, Zhiyong Cai, Jilei Zhang, Qiangu YanKeywordsPyrolysis, biomass energy, synthetic fuels, wood waste as fuel, fuelwood, char, wood waste, utilization, forest biomass, biomass, nitrogen, hydrogen, temperature, wood chips, Pinus, pine, heat treatment, charcoal, synthesis, biomass fuel, wood as fuel, biorefining, bioconversion, chips, purge gas, biocharSourceForest products journal. Vol. 61, no. 5 (2011): p. 367-371.Year2011
- Extreme weather often contributes to crown fires, where the fire spreads from one tree crown to the next as a series of piloted ignitions. An important aspect in predicting crown fires is understanding the ignition of fuel particles. The ignition criterion considered in this work is the critical mass flux criterion - that a sufficient amount of pyrolysis gases must be generated for a diffusion flame to be established above the surface. An apparatus was built to measure the critical mass flux for sustained flaming ignition of woody materials for varying environmental conditions (heat flux...AuthorsSara S. McAllister, Mark A. Finney, Jack D. CohenKeywordsSourceIn: 7th US National Technical Meeting of the Combustion Institute; Georgia Institute of Technology, Atlanta, GA; 20-23 March 2011. 1: 1698-1704.Year2011
- The largest issues facing forests in the United States are no longer about public lands. The public still wants the same things envisioned by the Weeks Actwater protection, timber supply, aesthetics, and recreational opportunities (U.S. Forest Service 1913)but the focus must now be on the lands whose fate is more uncertain. We have entered a new era, the era of private forest conservation.AuthorsBrett J. ButlerSourceForest History Today. Spring/Fall: 87-91.Year2011
- This study investigates the effects of alkaline copper quaternary (ACQ) preservative treatment and of plywood glue lines on resistance-based moisture content (MC) measurements. Moisture meter readings using stainless steel screws as electrodes were acquired over a range of moisture conditions in Southern Yellow Pine (SYP) lumber and plywood. Calibration equations are presented for predicting gravimetric MC from meter readings taken in SYP lumber and SYP plywood with or without ACQ treatment. These corrections assume that the meter has been set for SYP. Correlation equations are also...AuthorsC.R. Boardman, Samuel V. Glass, Charles G. CarllKeywordsMoisture meters, calibration, wood preservatives, moisture, wood moisture, accelerated life testing, electrochemical analysis, electric measurements, electrodes, plywood, testing, southern pine, electric properties, accelerated testing, treated wood, preservative treated wood, exposure tests, preservatives, alkaline copper quaternary, ACQ, moisture content, southern yellow pine, electrical conductance, calibration, plywood, resistanceSourceJournal of testing and evaluation. Vol. 40, no. 1 (2011): 10 p.: Paper ID JTE103895.Year2011
- The seed ecology of the federally endangered shrub, Lindera melissifolia was investigated to determine if this aspect of the species life history contributes to the rarity of the species. Lindera melissifolia has the capacity to form a short-lived (two growing seasons) persistent soil seed bank if fruit pulp remains on seeds following dispersal and subsequent winter flooding occurs. Seeds, both with or without pulp (i.e., mesocarp and exocarp), exhibited tolerance to submergence, but were not hydrochorous. Following 6–12 weeks cold stratification (5u or 5/1u C) or submersion in cold water...AuthorsTracy S. Hawkins, Jeffery L. Walck, Siti N. HidayatiSourceJournal of the Torrey Botanical Society 138:298-307Year2011
- Standing dead trees are one component of forest ecosystem dead wood carbon (C) pools, whose national stock is estimated by the U.S. as required by the United Nations Framework Convention on Climate Change. Historically, standing dead tree C has been estimated as a function of live tree growing stock volume in the U.S.'s National Greenhouse Gas Inventory. Initiated in 1998, the USDA Forest Service's Forest Inventory and Analysis program (responsible for compiling the Nation's forest C estimates) began consistent nationwide sampling of standing dead trees, which may now supplant previous...AuthorsGrant M. Domke, Christopher W. W. Woodall, James SmithKeywordsSourceCarbon Balance and Management. 6:14. [11 p.]Year2011