Treesearch
Displaying 26,611 - 26,620 of 65,215 Publications- This paper compares two methods of measuring the corrosion of steel and galvanized steel in wood: a long-term exposure test in solid wood and a rapid test method where fasteners are electrochemically polarized in extracts of wood treated with six different treatments. For traditional wood preservatives, the electrochemical extract method correlates with solid wood exposure which suggests that the reduction of cupric ions is the cathodic reaction in both the solid wood and the extract. For treatments without copper, the extract method predicted a higher corrosion rate than the solid wood...AuthorsSamuel L. Zelinka, Donald S. StoneKeywordsMetal testing, corrosion, anti-corrosives, fasteners, joints, wood preservatives, metal corrosion, steel corrosion, galvanized steel, zinc, iron oxides, copper, chemical reactions, moisture, wood moisture, service life, accelerated life testing, electrochemical analysis, electric measurements, electric properties, wood extractives, accelerated testing, connectors, treated wood, preservative treated wood, exposure tests, preservatives, chromated copper arsenate, CCA, alkaline copper quat, ACQ, didecyl dimethyl ammonium carbonate, DDAC, copper azole, CuAz, moisture contentSourceCorrosion science. Vol. 53, no. 5 (May 2011): p. 1708-1714.Year2011
- This study investigated the effect of fiber hornification during drying on lignocellulosic substrate enzymatic saccharification. Two chemically pretreated wood substrates and one commercial bleached kraft hardwood pulp were used. Heat drying at 105 and 150°C and air drying at 50% RH and 23.8°C for different durations were applied to produce substrate with various degrees of hornification. It was found that substrate enzymatic digestibilities (SEDs) of hornified substrates made from the same never-dried sample correlate very well to an easily measurable parameter, water retention value...AuthorsXiaolin Luo, Junyong ZhuKeywordsBiomass energy, biomass utilization, biotechnology, feedstock, pretreatment, fuelwood, wood chips, lignocellulose, biodegradation, hydrolysis, enzymes, industrial applications, cellulose, waste paper, recycling, plant cell walls, drying, sulfate pulping process, ethanol, Eucalyptus, aspen, lodgepole pine, SPORL, biomass fuel, bioconversion, biorefining, wood extractives, chemical utilization, saccharification, chips, water retention value, WRV, pulp and paper processes, hornification, alcoholSourceEnzyme and microbial technology. Vol. 48, no. 1 (Jan. 2011): p. 92-99.Year2011
- A main route for the efficient utilization of wood resources is to reduce wood to small pieces and then bond them together (Frihart and Hunt 2010). Although humankind has been bonding wood since early Egyptian civilizations, the quality and quantity of bonded wood products has increased dramatically over the past 100 years with the development of new adhesives and wood products.AuthorsCharles R. FrihartKeywordsSourceForest products journal. Vol. 61, no. 1 (Jan. 2011): p. 4-12.Year2011
- This study demonstrates the feasibility of integrating the production of nano-fibrillated cellulose (NFC), a potentially highly valuable biomaterial, with sugar/biofuel (ethanol) from wood fibers. Commercial cellulase enzymes were used to fractionate the less recalcitrant amorphous cellulose from a bleached Kraft eucalyptus pulp, resulting in a highly crystalline and recalcitrant cellulose (RC). The RC is difficult to hydrolyze to sugars but very suitable for producing biobased nanomaterials through mechanical homogenization. A range of fractionation yields of RC from 10–70% can be...AuthorsJunyong Zhu, Ronald C. Sabo, Xiaolin LuoKeywordsEnzymes, industrial applications, fungal enzymes, ethanol, fuelwood, biomass energy, biomass utilization, biotechnology, cellulose, hydrolysis, fermentation, sugars, Eucalyptus, wood-decaying fungi, sulfate pulping process, cellulase, yeast fungi, nanofibers, nano-fibrillated cellulose, NFC, nanocellulose, fractionation, wood fibers, biomass fuel, bioconversion, biorefining, chemical utilization, alcohol, wood extractives, pulp and paper processes, crystallinity, polymers, polymerization, tensile strength, opacitySourceGreen chemistry. Vol. 13, no. 5 (May 2011): p. 1339-1344.Year2011
- In recent years, there has been increased interest in the use of inorganic UV blocking nanoparticles for photostabilization of wood surfaces. Photostability and moisture uptake properties of wood veneers coated with a combination of hybrid inorganic-organic thin sol-gel films and organic light stabilizers was investigated. The light stabilizers were applied by brushing, and the thin sol-gel films were deposited on the wood surface by dipping in a sol prepared from a mixture of methyltrimethoxysilane, hexadecyltrimethoxysilane, and aluminum isopropoxide precursors. Although the sol-gel film...AuthorsMandla A. Tshabalala, Ryan Libert, Christian M. SchallerKeywordsWood surfaces, wood deterioration, coatings, thin films, moisture, water repellents, wood moisture, surface chemistry, weathering, color fading, ultraviolet radiation, veneers, veneering, aluminum, crosslinking, lignin, resorcinol, Pinus radiata, sol-gel deposition, moisture content, methyltrimethoxysilane, resistance to decay, wood decay, durability, discoloration, photostabilizers, hexadecyltrimethoxysilane, aluminum isopropoxide, softwoods, radiata pine, hybrid inorganic-organic thin films, light stabilizers, sol-gel precursors, UV absorber, weathering, wood coatingsSourceHolzforschung. Vol. 65, no. 2 (Mar. 2011): p. 215-220.Year2011
- Although (flotation) deinking has been a common industry practice for several decades, true residual ink content and deinking efficiency have never been quantified. Paper brightness and ERIC (Effective Residual Ink Concentration), based on measurements of the absorption coefficient of deinked pulp, have been used to determine performance of flotation deinking processes and the quality of deinked pulps. This study demonstrated a new method for quantifying true residual ink content of mixed office waste paper by determining the trace iron content in pulp samples. Two sets of laboratory...AuthorsBo Li, Gaosheng Wang, Kefu Chen, David W. Vahey, Junyong ZhuKeywordsSourceIndustrial & engineering chemistry research. Vol. 50, no. 11 (June 1, 2011): p. 6965-6971.Year2011
- The objective is to evaluate the effect of oxalic acid (OA) and steam-pretreatment on the primary performance of rice straw particleboards. In addition, the effect of various treatment conditions on carbohydrates released from rice straw particles was investigated. The results show that steam- and short durations of OA-treatment significantly improved the mechanical properties and dimensional stability of rice straw particleboards. However, steam-treated rice straw (without OA-treatment) panels exhibited even better performance when compared with OA-treated panels. OA-pretreatment time has...AuthorsXianjun Li, Zhiyong Cai, Jerrold Winandy, Altaf H. BastaKeywordsParticle board, testing, rice residues, mechanical properties, biomass utilization, fiber utilization, crop residues, natural resources, fibrous composites, plant fibers, oxalic acid, carbohydrates, temperature, sugars, feasibility studies, urea-formaldehyde resins, extraction, agricultural wastes, rice straw, physical properties, biocomposites, renewable natural resources, pretreatment, steam pressure, dimensional stability, particleboards, primary performanceSourceIndustrial crops and products. Vol. 33, no. 3 (May 2011): p. 665-669.Year2011
- In 2009, volume of industrial roundwood output from Florida’s forests totaled 474.6 million cubic feet, 3 percent less than in 2007. Mill byproducts generated from primary manufacturers declined to 117.1 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 265.2 million cubic feet; saw logs ranked second at 119.6 million cubic feet; other industrial products were third at 44.4 million cubic feet. Total receipts were relatively stable at 505.4 million cubic feet. The number of primary processing plants...AuthorsTony Johnson, Jarek NowakKeywordsSourceResour. Bull. SRS– 180. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 31 p.Year2011
- This study reports comparative evaluations of sugar and ethanol production from a native aspen (Populus tremuloides) between sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL) and dilute acid (DA) pretreatments. All aqueous pretreatments were carried out in a laboratory wood pulping digester using wood chips at 170°C with a liquid to oven dry (od) wood ratio (L/W) of 3:1 at two levels of acid charge on wood of 0.56 and 1.11%. Sodium bisulfite charge on od wood was 0 for DA and 1.5 or 3.0% for SPORL. All substrates produced by both pretreatments (except DA with...AuthorsS. Tian, W. Zhu, Roland L. Gleisner, X.J. Pan, Junyong ZhuKeywordsSugars, biomass energy, aspen, Populus tremuloides, ethanol, biomass utilization, pretreatment, hydrolysis, lignocellulose, biodegradation, biotechnology, wood chips, enzymes, industrial applications, fuelwood, fermentation, cellulose, energy consumption, lignin, hemicellulose, Saccharomyces cerevisiae, biotechnology, yeast fungi, SPORL, biomass fuel, saccharification, bioconversion, biorefining, alcohol, chips, chemical utilization, sodium bisulfite, acid hydrolysis, hydrolysates, biofuels, cellulosic ethanol, forest biomass, woody biomass, fermentation, enzymatic hydrolysisSourceBiotechnology progress. Vol. 27, no. 2 (2011): p. 419-427.Year2011
- In 2009, industrial roundwood output from Mississippi’s forests totaled 685.0 million cubic feet, 23 percent less than in 2007. Mill byproducts generated from primary manufacturers decreased 41 percent to 185.8 million cubic feet. Almost all plant residues were used primarily for fuel and fiber products. Pulpwood was the leading roundwood product at 396.4 million cubic feet; saw-logs ranked second at 219.6 million cubic feet; veneer logs were third at 46.9 million cubic feet. There was a total of 73 primary processing plants in 2009, a loss of 11 since 2007. Total receipts decreased 30...AuthorsJames Bentley, Tony JohnsonKeywordsSourceResour. Bull. SRS–181. Asheville, NC: U.S. Department of Agriculture Forest Service, Southern Research Station. 31 p.Year2011