Treesearch
Displaying 26,641 - 26,650 of 65,215 Publications- The gasification of pine and mixed-hardwood chips has been carried out in a pilot-scale system at a range of gas flow rates. Consuming ~17-30 kgh-1 of feedstock, the producer gas was composed of ~200 dm3 m-3 carbon monoxide, 12 dm3 m-3 carbon dioxide, 30 dm3 m-3 methane and 190 dm3 m-3 hydrogen, with an energy content of ~6 MJ m-3 for both feedstocks. It was found that the efficiency of the system was enhanced at higher flow rates.AuthorsThomas Elder, Les GroomKeywordsSourceBiomass and Bioenergy 35:3522-3528Year2011
- Forest understory grasses are of significance in the initiation, establishment and maintenance of fire, whether used as a management tool or when occurring as wildfire. The fundamental thermal properties of such grasses are critical to their behavior in fire situations and have been investigated in the current work by the application of thermogravimetric analysis (TGA). TGA was performed in nitrogen and air, over a range of heating rates, allowing for the determination of activation energies and temperatures associated with the degradation of hemicelluloses and cellulose. Of particular...AuthorsThomas Elder, John S. Kush, Sharon M. HermannKeywordsSourceThermochimica Acta 512:170-177Year2011
- Moisture barrier properties of films based on xylan reinforced with several cellulosic resources including nanocrystalline cellulose, acacia bleached kraft pulp fibers and softwood kraft fibers have been evaluated. Measurements of water vapor transmission rate (WVTR) were performed by a modification of the wet cup method described by ASTM E 96-95, indicating that membranes with 10% nanocrystalline cellulose, prepared using a sulfuric acid, exhibited the lowest permeability value of 174 g mil/hm2 among the composite films studied. Both the acacia and the softwood kraft pulp fibers when used...AuthorsAmit Saxena, Thomas Elder, Arthur J. RagauskasKeywordsSourceCarbohydrate Polymers 84:1371-1377Year2011
- Current laboratory test methods to measure efficacy of new mold inhibitors are time consuming, some require specialized test equipment and ratings are subjective. Rapid, simple quantitative assays to measure the efficacy of mold inhibitors are needed. A quantitative, colorimetric microassay was developed using XTT tetrazolium salt to metabolically assess mold spore germination. Quantitative values for the inhibition of mold spore germination using the XTT assay were 30-fold lower for thiabendazole and Durazol than the calculated MIC90 based on subjective ratings using current standard...AuthorsCarol A. Clausen, Vina YangKeywordsBiodegradation, wood-decaying fungi, mold control, biodegradation, fungicides, antifungal agents, salts, tetrazolium salts, colorimetry, spores, susceptibility, wood preservatives, biocides, resistance to decay, decay fungi, wood decay, XTT assay, thiabendazole, Durazol, preservative treated wood, treated wood, antifungal, colorimetric assay, mold fungi, spore germinationSourceClausen, Carol A.; Yang, Vina W. 2011. A rapid colorimetric assay for mold spore germination using XTT tetrazolium salt. IRG/WP ; 11-20462. Stockholm, Sweden : IRG Secretariat, 2011: [11] p.Year2011
- Value Prior to Pulping (VPP) is a novel biorefining concept for pulp mills that includes hydrolysis extraction of hemicellulose wood sugars and acetic acid from pulpwood prior to pulping. The concept involves conversion of wood sugars via fermentation to fuel ethanol or other chemicals and the use of remaining solid wood material in the pulping process. This paper provides an overview of the methods and results from analysis of the concept as a hypothetical business investment at a pulp and paper mill equipped for making thermomechanical pulp (TMP).AuthorsTed Bilek, Carl J. Houtman, Peter J. InceKeywordsSourceTappi journal. Vol. 10, no. 5 (May 2011): p. 31-38.Year2011
- An AWPA laboratory choice test was performed with Reticulitermes flavipes (Kollar) to determine the role of feeding stimulation or aggregation by N’N napthaloylhydroxylamine (NHA). Pine blocks were vacuum treated with aqueous concentrations of NHA ranging from 250-10,000ppm and exposed to one gram R. flavipes workers in the dual block choice test which included one treated and one untreated block per modified AWPA laboratory test (E1-97) jar. At the end of four weeks, all test blocks were removed and replaced by either filter paper or untreated pine or aspen to observe long-term mortality/s...AuthorsFrederick Green, S. Nami Kartal, Patricia K. Lebow, Rachel A. ArangoKeywordsReticulitermes flavipes, termites, insect pests, insect control, insecticides, insect baits, insect repellents, cellulose, susceptibility, mortality, wood deterioration, biodegradation, insect food, aspen, pine, southern pines, wood preservatives, preserved wood, N'N-napthaloylhydroxylamine, termite control, NHA, resistance to decay, wood decay, preservation, treated wood, preservative treated wood, preservatives, decomposition of wood, mass loss rate, exposure tests, two-choice tests, choice test, feeding stimulantSourceGreen, Frederick; Kartal, S. Nami; Lebow, Patricia K.; Arango, Rachel A. 2011. NHA choice test : feeding dilemma for Reticulitermes flavipes (Kollar). IRG/WP ; 11-10746. Stockholm, Sweden : IRG Secretariat, 2011: 10 p.Year2011
- Raman spectroscopy is being increasingly applied to study wood and other lignin-containing biomass/biomaterials. Lignin’s contribution to the Raman spectra of such materials needs to be understood in the context of various lignin structures, substructures, and functional groups so that lignin-specific features could be identified and the spectral information could be interpreted usefully. Additionally, to enhance the utility of Raman as a characterization tool, an understanding of chemical-treatment-induced changes to the lignin spectrum is important. In the present work, Raman spectra of...AuthorsUmesh P. Agarwal, James McSweeny, Sally RalphKeywordsRaman spectroscopy, wood chemistry, Fourier-transform spectroscopy, lignin analysis, bleaching, spectrum analysis, pulping, lignocellulose, black spruce, hydrogen peroxide, hydrogenation, acetylation, methylation, chemical reactions, loblolly pine, aspen, softwoods, hardwoods, Picea mariana, Pinus taeda, Populus, chemical composition, spectroscopy, liquidambar, sweetgum, diazomethane, lignin, pulping, FT-Raman spectroscopy, milled-wood lignin, diimide-after borohydride, acetic anhydrideSourceJournal of wood chemistry and technology. Vol. 31, no. 4 (2011): p. 324-344.Year2011
- An introduced or exotic species is commonly defined as an organism accidentally or intentionally introduced to a new location by human activity (Williamson 1996; Richardson et al. 2000; Guo and Ricklefs 2010). However, the counting of exotics is often inconsistent. For example, in the US, previously published plant richness data for each state are only those either native or exotic to the US (USDA and NRCS 2004), not actually to the state. Yet, within-country (e.g., among states, counties) species introductions which form “homegrown exotics” (Cox 1999) or “native invaders” (Simberloff...AuthorsQinfeng GuoSourceNeoBiota 9:71-73Year2011
- We developed a water‐centric monthly scale simulation model (WaSSI‐C) by integrating empirical water and carbon flux measurements from the FLUXNET network and an existing water supply and demand accounting model (WaSSI). The WaSSI‐C model was evaluated with basin‐scale evapotranspiration (ET), gross ecosystem productivity (GEP), and net ecosystem exchange (NEE) estimates by multiple independent methods across 2103 eight‐digit Hydrologic Unit Code watersheds in the conterminous United States from 2001 to 2006. Our results indicate that WaSSI‐C captured the spatial and temporal variability...AuthorsGe Sun, Peter Caldwell, Asko Noormets, Steve McNulty, Erika C. Mack, al. et.SourceJournal of Geophysical Research 116:G00J05Year2011
- This review on research on life cycle carbon accounting examines the complexities in accounting for carbon emissions given the many different ways that wood is used. Recent objectives to increase the use of renewable fuels have raised policy questions, with respect to the sustainability of managing our forests as well as the impacts of how best to use wood from our forests. There has been general support for the benefits of sustainably managing forests for carbon mitigation as expressed by the intergovernmental Panel on Climate Change in 2007. However, there are many integrated carbon...AuthorsBruce Lippke, Elaine Oneil, Rob Harrison, Kenneth E. Skog, Leif Gustavsson, Roger SathreKeywordsGreenhouse gases, environmental aspects, wood products, carbon sequestration, measurement, plant biomass, carbon content, carbon cycle, forest products, carbon dioxide, forest ecology, greenhouse effect, greenhouse gases, forest products industry, sustainable forestry, carbon dioxide mitigation, greenhouse gas mitigation, forest management, climatic changes, product life cycle, environmental impact analysis, renewable natural resources, service life, biomass utilization, renewable energy sources, energy industries, biomass energy, fuelwood, uncertainty, carbon stocks, emissions, wood as fuel, review articleSourceCarbon management. Vol. 2, no. 3 (2011): p. 303-333.Year2011