Treesearch
Search National Treesearch
Displaying 1,891 - 1,900 of 4,661 Publications
- Woody biomass makes up the major portion of terrestrial carbon, and forest ecosystems contain enormous reservoirs of lignocellulose belowground, in dead trees, and litter. Decomposition of this recalcitrant material and mobilization of nutrients are essential for forest health [reviewed by Boddy and Watkinson (1995)]. Although mechanisms are incompletely understood, initial decomposition of lignocellulose is efficiently carried out by certain filamentous fungi, and the genomes of representative species have been recently sequenced. This review covers these genome studies and the insight...AuthorsPhilip J. Kersten, Daniel CullenKeywordsSourceB.A. Horwitz et al. (eds.), Genomics of Soil- and Plant-Associated Fungi, Soil Biology 36, 2013; pp. 311-332.Year2013
- This design guide summarizes recent research on the corrosion of metals in treated wood, presents design strategies to minimize corrosion of metals in contact with treated wood, and is targeted toward engineers, architects, builders, and homeowners. The guide is organized as a “question and answer” document. While the questions are arranged in a logical order, each question and answer are self-contained. Special efforts have been made to provide a comprehensive bibliography to direct the reader to further information on each question. The document was created to give practical “hands-on”...AuthorsSamuel L. ZelinkaKeywordsSourceUSDA Forest Service, Forest Products Laboratory, General Technical Report, FPL-GTR-227, 2013; 15 p.Year2013
- One key barrier to converting woody biomass to biofuel through the sugar platform is the low efficiency of enzymatic cellulose saccharification due to the strong recalcitrance of the crystalline cellulose. Significant past research efforts in cellulosic biofuels have focused on overcoming the recalcitrance of lignocelluloses to enhance the saccharification of the recalcitrant cellulose. However, in this work [1,2], we demonstrate the conversion of recalcitrant cellulose into cellulosic nanomaterials, which have attracted a great deal of attention recently due to their unique properties and...AuthorsRonald C. Sabo, Junyong ZhuSourceIn: Production and applications of Cellulose Nanomaterials, Chapter 2.1, TAPPI Press 2013; pp. 191-193.Year2013
- The design, construction, and use of covered timber bridges is all but a lost art in these days of pre-stressed concrete, high-performance steel, and the significant growth both in the volume and size of vehicles. Furthermore, many of the existing covered timber bridges are preserved only because of their status on the National Registry of Historic Places or the diligent maintenance and care of the owners of these structures, or both. Of the covered timber bridges that remain in the United States, only a small percentage still stand today because of arson, vandalism, neglect, natural...AuthorsBrett Phares, Terry Wipf, Ryan Sievers, Travis HostengKeywordsSourceGeneral Technical Report FPL-GTR-223Year2013
Chapter 1.2 Occupational Exposure Characterization during the Manufacture of Cellulose Nanomaterials
The forest products industry accounts for approximately 6% of total U.S. manufacturing output; nanotechnology could play an increasing role. As with any emerging technology, cellulose nanomaterials may become commercially available in a range of products before society obtains sufficient knowledge of the risk they pose to workers, consumers, and the environment. In partnership with the Forest Products Laboratory, the National Institute for Occupational Safety and Health conducted an exposure characterization study of the production of cellulose nanocrystals (CNC) that had been tagged with...AuthorsKenneth F. Martinez, Adrienne Eastlake, Alan W. Rudie, Charles GeraciSourceIn: Production and applications of Cellulose Nanomaterials, TAPPI Press, Chapter 1.2, 2013; pp. 61-64.Year2013- The effect of drying method on selected material properties of nanocellulose was investigated. Samples of nanofibrillated cellulose (NFC) and cellulose nanocrystals (CNC) were each subjected to four separate drying methods: air-drying, freeze-drying, spray-drying, and supercritical-drying. The thermal stability and crystallinity of the dried nanocellulose were evaluated using thermogravimetric analysis (TGA) and X-ray diffraction. Supercritical-drying produced NFCs with the least thermal stability and the lowest crystallinity index. Air-drying or spray-drying produced NFCs which were more...AuthorsYucheng Peng, Douglas J. Gardner, Yousoo Han, Alper Kiziltas, Zhiyong Cai, Mandla A. TshabalalaSourceCellulose, 2013; 14 p.Year2013
- ASTM(1) G198, Standard test method for determining the relative corrosion performance of driven fasteners in contact with treated wood, was accepted by consensus and published in 2011. The method has two different exposure conditions for determining fastener corrosion performance in treated wood. The first method places the wood and embedded fasteners in a chamber at 95% relative humidity (RH), 32 °C for 120 days. The second method involves a cyclic fog, with 48 hours of fog followed by 72 h of dry for 120 days. The corrosion rate of embedded metals is an extremely sensitive function of...AuthorsSamuel L. ZelinkaSourceIn: NACE International Corrosion Conference & Expo, 2013, paper #2507; 2013; 11 p.Year2013
- Potassium methyl siliconate (PMS) was investigated as a new nano modifier of wood fiber and wood flour to improve the compatibility between the fiber/flour and the plastic matrix in fiber reinforced plastic composites. Before injection molding, bleached and brown pulp fibers and mixed species wood flour were pretreated in PMS solutions. The morphology of the treated and untreated fiber and flour, the compatibility of PMS-treated fiber and flour with polyethylene (PE), and the water sorption and volumetric swell of PMS-treated fiber/flour plastic composites in a long-term soaking test were...AuthorsCheng Piao, Zhiyong Cai, Nicole M. Stark, Charles J. MonlezunKeywordsSourceJournal of Applied Polymer Science, Volume 129, Number 1, 2013; pp. 193-201.Year2013
- The Fiber and Chemical Sciences Research Work Unit at the Forest Products Laboratory began working out the preparation of cellulose nanocrystals in 2006, using the method of Dong, Revol, and Gray. Initial samples were provided to several scientists within the Forest Service. Continued requests for this material forced scale-up from the initial 20 g scale to kg scale and eventually resulted in an award of $1.7 million dollars to the laboratory to purchase the equipment needed to scale production up to 20 kg per batch. The new pilot facilities started up in July 2012 with batch sizes of 15...AuthorsRichard Reiner, Alan W. RudieKeywordsSourceIn: Production and applications of Cellulose nanomaterials, TAPPI Press, Chapter 1.1, 2013; pp. 21-24.Year2013
- Flexible electronics have a large number of potential applications, including malleable displays and wearable computers. Current research into high-speed, flexible electronic substrates uses plastics for the flexible substrate, but these plastics typically have drawbacks, such as high thermal expansion coefficients. Transparent films made from cellulose nanofibrils (CNFs) have low thermal expansion and therefore the potential to serve as substrates for flexible electronics. Initial results show that cellulosic nanomaterials are promising candidates for electronic substrates, and research...AuthorsRonald C. Sabo, Jung-Hun Seo, Zhenqiang MaKeywordsSourceIn: Production and applications of Cellulose Nanomaterials, Chapter 2.3, TAPPI Press 2013; pp. 263-264.Year2013