Treesearch

In January 1992, the Christian Hollow bridge was constructed in Steuben County, New York. The bridge is a single-span, stress-laminated box-beam superstructure that is 9.1 m long, 9.8 m wide, and 502 mm deep (30 ft long, 32 ft wide, and 19-3/4 in. deep). The performance of the bridge was continuously monitored for 28 months, beginning shortly after installation. Performance monitoring involved gathering and analyzing data relative to the wood moisture content, force level in the stressing bars, vertical bridge creep, and behavior under static load conditions. In addition, comprehensive...

This paper describes a mathematical model developed by the Forest Products Laboratory to predict attic temperatures, relative humidities, and roof sheathing moisture content. Comparison of data from model simulation and measured data provided limited validation of the model and led to the following conclusions: (1) the model can provide reasonably accurate estimates for temperatures of roof sheathing and attic air, although heat storage effects often cause delay of 1 to 2 h in attic air temperatures; (2) the model can accurately predict the frequency of occurrence of high roof sheathing...

Analytical procedures to predict the fire endurance of structural wood members have been developed worldwide. This research is reviewed for capability to predict the results of tests in North America and what considerations are necessary to apply the information here. Critical research needs suggested include: (1) Investigation of load levels used in reported tests, and parameters in analyses, for application to North American practice; (2) the effect of lumber grade on wood property response at elevated temperature; and (3) further effort in reliability-based design procedures so that the...

A model was developed for predicting the statistical distribution of glued-laminated beam strength and stiffness under normal temperature conditions using available long span modulus of elasticity data, end joint tension test data, and tensile strength data for laminating-grade lumber. The beam strength model predictions compared favorably with test data for glued-laminated beam strength data with 8 and 10 laminations; however, the model predicted strength values 30 percent higher for glued-laminated beam strength data with 4 laminations. Fire endurance and structural resistance were...

The North Siwell Road bridge was constructed during December 1994 in Hinds County, Mississippi. The bridge is a single-span, stress-laminated T-beam structure that measures 9.1 m (30 ft) long and 8.7 m (28.5 ft) wide. Performance of the bridge was monitored for 24 months, beginning at the time of installation. Monitoring involved gathering and evaluating data relative to the moisture content of the wood components, force level of stressing bars, and behavior of the bridge under static load conditions. In addition, comprehensive visual inspections were conducted to assess the overall...

The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln operator can use to maintain an efficient kiln operation and therefore contribute to lumber drying quality. This report is one component of the IMPROVE Program. It contains a guidebook1checklist for drying quality softwood that kiln operators or management can use to readily evaluate how well their operations rate on those factors that most strongly affect drying...

The IMPROVE Lumber Drying Program is intended to increase awareness of the lumber drying system as a critical component in the manufacture of quality lumber. One objective of the program is to provide easy-to-use tools that a kiln operator can use to maintain an efficient kiln operation and therefore improve lumber drying quality. This report is one component of the IMPROVE Program. It contains a Guidebook-Checklist for Quality Drying of Hardwood Lumber that kiln operators or owners can use to readily evaluate how well their operations rate on those factors that most strongly affect drying...

Estimates of the amounts of wood products used in constructing civil conservation and development projects by the Corps of Engineers in the United States are presented for the years 1962 and 1978. Amounts of lumber, laminated lumber, poles and piling, and plywood used in construction are stratified by five construction categories, and three types of uses. Estimates of the amounts of wood products used in military construction in the United States is presented in a companion report.

This is a report on the timber resources of Pennsylvania. It is based on the findings of a survey made by the Forest Service, U.S. Department of Agriculture as part of a nationwide forest appraisal. The survey data show--as of January 1955--the area and condition of the forest land and the volume and quality of the standing timber. They also include, for the year 1954, estimates of timber growth and mortality and estimates of timber cut for forest products. The forest survey was conducted over a 5-year period, 1949-54. NOTE: this document was scanned from a personal copy and contains...

In the 15 years since it was first reported in the United States, dogwood anthracnose (caused by Discula destructive sp. nov.) has spread rapidly and caused serious losses among flowering dogwoods (Cornus florida L.), particularly in the South. Infection begins in leaves and spreads to twigs and branches, which dieback. Main-stem infections cause cankers, which kill the trees. In the South, infection is most likely at higher elevations and on moist to wet sites. Shade increases risk of infection and mortality. High-value trees can be protected by mulching, pruning, and watering during...