Treesearch

This revised guide provides practical information on silvicultural treatments to grow paper birch as a timber crop. It covers treatments for existing stands, the regeneration of new stands, and subsequent culture to maturity. The stocking chart has been revised to reflect results of current growth studies.

A multivariate regression model was developed to predict green board-foot yields for the seven common factory lumber grades processed from northern red oak (Quercus rubra L.) factory grade logs. The model uses the standard log measurements of grade, scaling diameter, length, and percent defect. It was validated with an independent data set. The model can be modified to predict various combinations of lumber grades.

Wood furniture manufacturers' demands for oak, maple, poplar, open-grain, and close-grain lumber are estimated using cross-sectional, time-series techniques. The analyses indicate that the demand for open-grain species is more price responsive than the demand for close-grain species. The calculated cross-price elasticities indicate that furniture producers do substitute species through style decisions. However, poplar lumber has a negative cross-price elasticity, indicating that it is used with, rather than substituted for, other species.

This publication classifies 279 American metropolitan areas by ecoregion and potential natural vegetation. The classification forms a baseline of expected vegetation structure and composition that can assist scientists and policy makers in making urban forestry generalizations about classes of cities.

The growth response of trees in spruce-fir-hemlock stands was recorded from plots that were managed to control stand density, species composition, length of harvest interval, and salvage of mortality. Basal area, volume, and diameter increment are presented by species and size classification for harvesting intervals of 5, 10, and 20 years.

A crosscut-first furniture rough mill was simulated to evaluate processing and raw material costs on an individual part basis. Distributions representing the real-world characteristics of lumber, equipment feed speeds, and processing requirements are programed into the simulation. Costs of parts from a specific cutting bill are given, and effects of lumber input costs are discussed. GASP IV (A Combined Continuous/Discrete FORTRAN-based Simulation Language) was used.

Data collected from 600 field plots in central Pennsylvania forests threatened by gypsy moth point to a greater potential for damage downrange. Though greater than in the Poconos, losses are not expected to be spectacular. Still, some forest landowners will suffer heavy tree mortality to the pest.

Low-grade white oak timber removed during a timber stand improvement cut on the Jefferson National Forest in Virginia was made into sawlogs, poles, 6-foot bolts, 4-foot bolts, pulpwood, and firewood. The 6-foot bolts were sawed to two cants per bolt; cants were resawed to 4/4 System 6 boards; boards were dried to 6 percent moisture content and made into frame blanks using System 6 technology. The blanks were used by an upholstered furniture company to make frames and were found to be very satisfactory. Yields of required frame blanks were good, 56 percent, when only the poorest two-thirds...

A computer program is described that allows a company to determine the number of edge-glued, standard-size blanks required to satisfy its rough-part needs for a given production period. Yield and cost information also is determined by the program. A list of the program inputs, outputs, and uses of outputs is described, and an example analysis with sample output is included.

The purpose of this revised model is to project estimates of consumption and price of wooden pallets in the short term. This model differs from previous ones developed by Schuler and Wallin (1979 and 1980) in the following respects: The structure of the supply side of the market is more realistically identified (from an economic theory point of view) by including lagged relationships; more recent data are incorporated into the data base; and the statistical correlation is improved. The model is intended to provide reliable estimates of the quantity of pallets required and their real price...