Treesearch

This resource update provides an overview of forest resources in South Dakota based on an inventory conducted by the U.S. Forest Service, Forest Inventory and Analysis (FIA) program at the Northern Research Station (NRS) in cooperation with the South Dakota Department of Agriculture, Resource Conservation and Forestry Division. Estimates are based on field data collected using the FIA annualized sample design and are updated yearly. In 2014, NRS-FIA changed from a 5- to a 7-year inventory cycle, wherein one-seventh, or 14.3 percent, of plots will be measured annually until cycle completion....

Fusiform rust is the most devastating disease of slash pine (Pinus elliottii) and loblolly pine (Pinus taeda) in the southeastern United States. Since the 1970s, the USDA Forest Service Forest Inventory and Analysis (FIA) Program has assessed fusiform rust incidence on its network of ground plots in 13 states across the southeastern United States. Through analysis of the FIA data, we found that current fusiform rust incidence varied by state, forest type, and stand origin and that across all stand ages, rust incidence was approximately equal in planted and natural stands of loblolly pine...

In plywood production, human operators find it difficult to precisely monitor the spread rate of adhesive in real-time. In this study, macroscopic fluorescence was used to estimate spread rate (SR) of urea formaldehyde adhesive on birch (Betula pendula Roth) veneer. This method could be an option when developing automated real-time SR measurement for plywood or processes. Estimation of SR was shown where adhesive was spread uniformly and also where adhesive was spread as lines. For uniform spreading, average intensity of the fluorescence image predicted the SR of adhesive well, with an R2...

Cellulose nanofibril (CNF) films currently provide great opportunity in many applications with advantages of excellent mechanical strength, high light transmittance, and good barrier properties. However, processes for preparing CNFs are typically tedious and vary, along with their properties. Here, five preparation methods using various combinations of filtration, freeze-drying, and casting are applied to produce CNF films, and their major properties are compared. Three different types of CNFs having a range of fiber diameter and aspect ratio were examined using each of these five preparati...

Fiber-reinforced polymer composites have gained popularity through their advantages over conventional metallic materials. Most polymer composites are traditionally made with reinforcing fibers such as carbon or glass. However, there has been recent interest in sourcing these reinforcing fibers from renewable, natural resources. Nanocellulose-based reinforcements constitute a new class of these naturally sourced reinforcements. Some unique behavior of nanocellulose creates both opportunities and challenges. This chapter reviews the progress and some of the remaining issues related to the...

Methods to increase the energy density of biofuel feedstock for shipment are important towards improving supply chain efficiency in upstream processes. Towards this end, densified pretreated lignocellulosic biomass was produced using hot-pressing. The effects of fiber hornification induced by hot-pressing on enzymatic digestibilities of lodgepolepine and poplar NE222 wood chips pretreated by sulfite pretreatment to overcome recalcitrance of lignocelluloses (SPORL) were examined. Pretreated wood chips were pressed at 25, 70, 90, 110, and 177 °C. The cellulose accessibilities of the pressed...

Cellulose nanocrystals (CNCs), a class of renewable bionanomaterials with excellent mechanical properties, have gained major interest as filler for polymers. However, challenges associated with effective CNC dispersion have hindered the production of composites with desired property enhancements. Here, composites of polypropylene (PP) and low density polyethylene (LDPE) with 5e10 wt% unmodified CNC are produced for the first time via a solventless process. In particular, we employ solid-state shear pulverization (SSSP). Optical and electron microscopy reveals excellent CNC dispersion with...

This report presents forecasts from the Southern Forest Futures Project that are specific to the Mid-South, which consists of four sections located within Arkansas, Oklahoma, and Texas: the Ozark-Ouachita Highlands, the Cross Timbers, the High Plains, and the West Texas Basin and Range. Ranging from Little Rock, AR to El Paso, TX, it is the most diverse subregion in the South. The Mid-South faces a number of important challenges to management of forests and woodlands over the next 50 years, including population increases, the likelihood for increased drought, increased demand for water and...

Biological invasions are one of the most significant global-scale problems caused by human activities. Earthworms function as ecosystem engineers in soil ecosystems because their feeding and burrowing activities fundamentally change the physical and biological characteristics of the soils they inhabit. As a result of this “engineering,” earthworm invasions can have significant effects on soil physical, chemical and biological properties. The species Amynthas agrestis (family Megascolecidae) was introduced to the United States from Asia, and has expanded its distribution range to include...

Este informe presenta los resultados del cuarto inventario forestal de las islas del Estado Libre Asociado de Puerto Rico. El área de bosque en la isla grande de Puerto Rico se mantuvo constante o aumentó ligeramente del año 2004 al 2009. Este cambio parece indicar que la tasa de incremento de cubierta forestal en la isla grande de Puerto Rico ha disminuido desde que el inventario forestal comenzó en 1980. Tanto Culebra como Vieques pudieron haber experimentado una pérdida leve en cubierta forestal. Sin embargo, los errores de muestreo son lo suficientemente amplios como para abarcar estos...