Treesearch

Silver maple, yellow poplar, and black walnut lumber was dried in a prototype jet dryer over a range of temperatures from 120 degrees to 400 degrees Fahrenheit and air velocities from 1,000 to 9,000 fpm. Different drying schedules were developed for each type of wood. The quality of the jet-dried lumber was good and compared favorably with kiln-dried lumber.

This paper presents tables of total tree green weight, green weight to a 5 cm and a 10 cm top diameter, dry weight to both 5 cm and 10 cm top diameter, and green volume to a 5 cm and 10 cm top diameter for six upland hardwood species. Both metric and English unit tables are included.

Describes a net volume equation for northeastern Minnesota developed as part of the 1977 Minnesota Forest Inventory. Equation coefficients are presented by species groupings for both cubic foot and board foot volumes for five tree classes.

Two trials on different sites indicate that clearcut black spruce reproduces well after full-tree skidding only on nonbrushy sites that have fairly abundant sphagnum seedbeds and adequate natural seeding.

Container size and shape, potting medium, and genotype interacted to influence the growth of black walnut (Juglans nigra L.) seedlings. Larger containers tended to produce larger trees. In tall, narrow, vent-pipe containers, different, proportions of peat and sand in potting media had no effect on total weight; a higher proportion of peat than of very fine sand in the potting media reduced the shoot root ratio. In conventionally shaped pots, seedlings averaged 123 percent heavier when grown in a soil mix containing 75 percent peat and 25 percent sand than when grown in pure sand.

Soil properties (organic matter content, pH, texture, and microclimate) were related to early height growth of jack pine (Pinus banksiana, Lamb.), red pine (Pinus resinosa, Ait.), white spruce (Picea glauca, (Moench) Voss), and hybrid larch (Larix leptolepis x Larizx decidua) planted in northern Wisconsin. Based on 2-year height growth, jack pine and hybrid larch performed best on these silty soils.

Energy requirements for lumber drying kilns can depend on kiln size and range from 18,000 Btu/lb water evaporated for a 10 board food capacity kiln to 1,600 Btu/lb water evaporated for a 100,000 board foot capacity kiln.

Compares calorific values for components of nine Populus clones. The components include stem wood, stem bark, and branches. Also compares calorific values for clones of balsam poplar and black cottonwood parentages.

Pulpwood production in the Lake States--Michigan, Minnesota, and Wisconsin--climbed to 5.55 million cords in 1979. Pulpwood production is shown by county and species group for these three States.

Tree measurement data from plantations established in 1970 and 1973 and grown under intensive culture were used to establish various dimensional relations and biomass equations for Populus ''Tristis #1''. These equations subsequently have been used to estimate yields on study plots and for projections of future yields. They are presented here for others working with this hybrid and as a guide to model forms which might be utilized for other species.