Treesearch

This Note illustrates how a sales summary can be modified to separately identify changes in sales realization caused by changes in market prices and by changes in the product mix sold. With this information, a sales summary can become a helpful record to gage effects of past production and marketing decisions.

Seven different adhesives were evaluated for durability as plywood adhesives by exposing panels and shear-test specimens to weathering at the Madison exposure site for nearly 8 years. Wet-strength loss and wood-failure changes were measured as a function of exposure time. The method of exposure accelerated the degradation that would have resulted from exposure in most service environments. Results were compared qualitatively with the information obtained by accelerated aging in the laboratory and analyzing wet strength loss as a rate process. The rapid, initial strength loss that had been...

Every homeowner with painted wood siding and trim at some time faces the job of repainting. In this note a simple test is described to determine whether an old surface will form a satisfactory bond with latex paints, and suggestions are given on preparing the surface to achieve a satisfactory bond.

Important mechanical properties of clear, straight-grained wood of 23 species are tabulated, along with coefficients of variation. These property estimates can be used to match up species with kind of material needed for a specific job, or to search for substitutes for a presently used species. Some of the species appear, with allowable properties, in two published plywood manuals. There are no similar hardwood lumber stress grades, but standard methods exist for generating them, should interest develop.

A standard for portable wood ladders has been in effect since 1923, and has been revised several times since then. The most recent publication is "American National Standard Safety Standard for Portable Wood Ladders," A14.1-1975, from American National Standards Institute, Inc. Methods of arriving at allowable stresses for wood ladder parts have never been clearly documented. This report out lines what was done in the latest revision of the standard to calculate allowable fiber stresses for establishing species groupings.

In-use tests in a combination brick and cement block yard and subsequent laboratory tests indicated that laminated pallet deckboards made from knife-cut, low-grade red oak logs can perform as well as deckboards of solid red oak. Performance was not significantly different between laminated oak deckboard pallets assembled with 2-l/2-in.-long by 15-gage staples and pallets assembled with conventional helically threaded pallet nails if approximately five staples were used for every three nails based on total fasteners per pallet. In a severe handling environment, a synthetic elastomeric...

An American wood. Description of the distribution, growth, habit, wood, and wood properties of the species. Includes bibliographical references.

An American wood. Description of the distribution, growth, habit, wood, and wood properties of the species. Includes bibliographical references.

An American wood. Description of the distribution, growth, habit, wood, and wood properties of the species. Includes bibliographical references.

Round wood pole use has changed without accompanying advancement in engineering design data. Previous pole design was based on the assumption that maximum stress occurred at the groundline but, with the larger poles that are now being used, maximum stress may occur along the pole length. For accurate engineering analysis the shape or taper of a pole must be known. Both curvilinear and straight-line functions were fit to data from 617 southern pine poles and from 225 Douglas-fir and 57 western redcedar trees. The best estimate of geometry or shape of the outer surface of the poles was a...